The Oil Conveyor system works as a conveyor belt that moves oil from one place to another. Its primary task is to purify the bilge water in a ship's keel or clean Bilge tank, and lead the oil into the spill oil tank and the separated water return.
Please look at this youtube film where I explain how the system works.
When the system has been running for some time, the bilge water is nearly pure water. When you the run it through the OWS, the average ppm value will be under 5ppm. We had evident that prove it.
The Conveyor belt is powered by hydraulic, so you can place it inside a tank. There are nearly no maintenance of the system. There are no electrical sensors or gauges that can cause problems.
The separation of oil and water is purely done bay the gravity difference of the oil and the water. The system looks after itself. You must change mops and hose in hose pump every 6 month. It costs less than U.S. $ 1000. Pleace contact us www.fmt.fo
Ports of Presence:
United Kingdom - Southampton
Bilge Water treatment Problems on OWS Settling System 15ppm 5ppm under The Faroe Islands.